Authors

Tao Ma, College of Electronic and Electrical Engineering, Henan Normal University, Xinxiang, China
Jinhui Yuan, State Key Laboratory of Information Photonics and Optical Communications, Beijing University of Posts and Telecommunications (BUPT), Beijing, China
Feng Li, Photonics Research Centre, Department of Electronic and Information Engineering, The Hong Kong Polytechnic University, Hung Hom, Hong Kong
Lei Sun, State Key Laboratory of Information Photonics and Optical Communications, Beijing University of Posts and Telecommunications (BUPT), Beijing, China
Zhe Kang, Photonics Research Centre, Department of Electronic and Information Engineering, The Hong Kong Polytechnic University, Hung Hom, Hong Kong
Binbin Yan, State Key Laboratory of Information Photonics and Optical Communications, Beijing University of Posts and Telecommunications (BUPT), Beijing, China
Qiang Wu, Department of Physics and Electrical Engineering, Northumbria University, Newcastle Upon Tyne, UKFollow
Xinzhu Sang, State Key Laboratory of Information Photonics and Optical Communications, Beijing University of Posts and Telecommunications (BUPT), Beijing, China
Heng Liu, College of Electrica and Electrical Engineering, Henan Normal University, Xinxiang, China
Fang Wang, College of Electronic and Electrical Engineering, Henan Normal University,Xinxiang, China
Bo Wu, College of Electronic and Electrical Engineering, Henan Normal University, Xinxiang, China
Chongxiu Yu, State Key Laboratory of Information Photonics and Optical Communications, Beijing University of Posts and Telecommunications (BUPT), Beijing, China
Gerald Farrell, Technological University DublinFollow

Document Type

Article

Rights

Available under a Creative Commons Attribution Non-Commercial Share Alike 4.0 International Licence

Abstract

In this paper, we propose a microdisk resonator with negative thermal optical coefficient (TOC) polymer for refractive index (RI) sensing with thermal stability. The transmission characteristics and sensing performances by using quasi-TE01 and quasi-TM01 modes are simulated by a three-dimensional finite element method. The influences of the TOC, RI, and thickness of the polymer on the sensing performances are also investigated. The simulation results show that the RI sensitivity Sn and temperature sensitivity ST with different polymers are in the ranges of 25.1-26 nm/RIU and 67.3-75.2 pm/K for the quasi-TE01 mode, and 94.5-110.6 nm/RIU and 1.2-51.3 pm/K for the quasi-TM01 mode, respectively. Moreover, figure-of-merit of the temperature sensing for the quasi-TM01 mode is in the range of 2 × 10 -4 -8 × 10 -3 , which can find important application in the implementation of the adiabatic devices.

DOI

https://doi.org/10.1109/JPHOT.2018.2811758


Share

COinS